5000 Watt 3 Phase Generator

Before we show our 5000W theree phase generator,let us know what is the three phase generator?

What is a three-phase generator

 Athree-phase generator is a generator that supplies power through three sequential currents at the same time. The AC three-phase generator is only three AC single-phase generators. These generators run in turn with an offset of 120 between the two generators at a time. Therefore, the generator generates three AC voltages in one cycle, which is beneficial to the continuous supply of constant voltage. This type of generator is useful when the power demand is high and constant.

For our this three-phase generator,it have many advantage which the single phase generator don’t have.

Advantages of three-phase generator: 

• Between two devices with the same power, the three-phase generator is smaller and lighter three-phase generators are more efficient in providing energy. Three-phase system is the most used system in the world
• Because the torque of these generators is constant and the vibration is small, the total instantaneous power is also constant. In other words, it will not be affected by changes three-phase generator winding has higher use efficiency
• These generators provide transmission advantages through thinner transmission links.
• The cost of the same power is lower.
• These generators have good performance and almost no maintenance problems

– Product Parameter

The 5000 Watt 3 Phase Generator is small in size and high in specific power, and is convenient to use. The structure of the whole machine is relatively simple, and the failure rate is low, so the performance is good and the reliability is high. It can achieve high efficiency and energy saving, and their average efficiency is high, which can maintain stable operation. It has high voltage regulation accuracy and can protect the battery very well. It is a permanent magnet small gasoline generator. It does not generate electric spark during operation, which can effectively improve the performance and always Magnetic generators avoid the effects of overcurrent charging

– Product Packaging & Delivery

Taizhou BISON people are always paying great attentions to quality controlling from the beginning to the end. Every piece of goods is tested strictly one by one before packing.

More different spcifications are available. If you are interested in our products, please feel free to contact us.

– Product Show

In daily life, when an alternator is used for electrical equipment, it often happens that the electrical equipment cannot work normally. The reason is that the AC output of the generator is not stable enough. At this time, a power regulator is needed to stabilize the voltage. It is also the AC regulated power supply commonly used in daily life. The AC stabilized power supply can stabilize the output voltage accuracy of the generator to the range allowed by the normal operation of the electrical equipment.

Whether it is a diesel generator or a gasoline generator, each cylinder performs work in a certain order, and the thrust acting on the piston becomes a force that pushes the crankshaft to rotate through the connecting rod, thereby driving the crankshaft to rotate. By installing the brushless synchronous alternator coaxially with the crankshaft of the power machine, the rotor of the generator can be driven by the rotation of the power machine. By using the principle of ‘electromagnetic induction’, the generator will output an induced electromotive force, and a current can be generated through the closed load circuit.

5000 Watt 3 Phase Generator is a type of alternator. Its construction is more complicated and it consists of the following main components:

(1) Excitation section: including the exciter and the magnetic field portion.

(2) Armature part.

(3) Case part: the iron frame and the base including the equipment preparation part.

It can meet the needs of a variety of main power applications, such as heavy construction sites, mining and logging operations, and industrial plants. It can meet various output needs by running in parallel. It is an ideal choice for organizations to use for uninterrupted applications, saving electricity costs and improving operational safety.