Gasoline Engine:

Panel Line

-International line

-Non-miscellaneous, to ensure 

stable output of current.

brands

–Leading

unstable current.

Carburetor

spray

–Easy to start and low Oil 

–Safety and longer life 

High voltage set

–without adding sand or plastic to keep stable

accessories is uneven and the operation is unstable

–Normally 1k

–Work with the  better raw materials supplier

–stand hard to break

–100% copper motor 

–have the longer life

AVR

–Using environmentally friendly imported electrical devices

–Protections, voltage ，current 

are more stable

–Voltage and current is not stable

–Standard aluminum;

–Fast heat dissipation;

–Generally made of aluminum, with poor heat dissipation

–The base pipe uses EPA material; 

–The processing precision reaches 0.001mm

–Poor wear resistance

–The ductility is poor,

–Easy to cause fracture

–Not easy to break 

–have long lift

thousands of pulling

–lower noise in 65bd;

–Various fashion models;

–The product design is relatively single

LONG SINGLE USE TIME  

Continuous 300H under 70% load

LITTLE SHAKE 

Under normal using, the machine shakes very little

Use special equipment to assemble ,

ensure the Beaning,Oil seal,Governor gear effective fit

The cylinder head stud bolts are all equipped with special air guns to ensure a high fit.

When assembling nuts for each muffler, spring pads need to be installed to ensure the fit of each component and the maximum noise reduction effect

For different parts, use different standards of torque

Water test is required in each engine assembly to ensure the tightness of itself

After engine assembly, basic testing will be carried out on each product.

Before the products are shipped, each product will be fully tested.